Full-screen rotating display - Live Power, Today's Energy, Max Demand, Energy Distribution, Recent Activity.
| Total | -- |
Last 30 minutes, updating every few seconds.
| Point | Wiring | kW | PF |
|---|
Estimate the RM impact of a strategy before implementing it - based on this month's highest recorded MD block.
| Strategy | kW reduction | Monthly savings | Annual savings | |
|---|---|---|---|---|
| Total | RM 0 | RM 0 | ||
Last 30 minutes, updating every few seconds.
Where this site's Alarm emails go (Abnormal status only). Leave blank to fall back to the platform default address.
Where this site's MD Warning/Breach emails go. Leave blank to fall back to the platform default address.
Add a meter here and any collector for this site will automatically start polling/subscribing to it - no need to edit config.json on every machine. Existing meters set up via config.json keep working unchanged.
| ID | Label | Wiring | Protocol | Connection | Profile |
|---|
ADW300 meters work automatically, no profile needed. For a different brand, define its register map here, then reference the profile's ID in that meter's entry in collector/config.json (profileId field).
| Name | Notes | Profile ID (for config.json) |
|---|
| Field | Register | Type | Data type | Word order | Scale |
|---|
| Name | Rated kW | Typical start | Notes |
|---|
| Month | PF penalty (RM) |
|---|
| Name | IP | Port | Unit ID |
|---|
| Device | Channel # | Label | Controls meter | Purpose | Sheddable |
|---|
| Tenant | Meter | Balance | Rate | Portal link |
|---|
Invited members get read-only access to just the pages you allow - you (the account owner) always have full access to everything.
| Status | Allowed pages |
|---|
Manual, Auto (threshold-based), or Timer (scheduled) control per relay channel. Configure relay devices and channels first in Settings.
Modbus TCP or MQTT - temperature, humidity, AHU pressure, or any other value you configure. One device can expose several points below.
| Name | Protocol | Connection |
|---|
For MQTT: leave JSON key blank if the topic's whole payload is just this one value. Set it if the device publishes a combined payload (multiple readings in one JSON message) - several points can then share the same Topic, each pulling out its own key.
| Device | Label | Type | Source | Unit |
|---|
Every reading captured in full detail. Choose a channel and date range, then filter or export the whole range as CSV.
| Timestamp | AV | BV | CV | AA | BA | CA | Total A | A kW | B kW | C kW | Total kW | kVAR | kVA | A PF | B PF | C PF | Total PF | Hz | Fwd kWh | Rev kWh | Demand kW |
|---|